Comparing differences of Phenolic Metal Wood Lockers

Post author By Jon Crain
Post date November 13, 2023

When considering lockers for an installation, factors such as the environment they will be in, the level of use and abuse they will encounter, maintenance capabilities, budget, and aesthetic preferences are all important. Below is a detailed comparison of phenolic, metal, and wood lockers based on these criteria:

Phenolic Lockers

Material Properties: Composed of layers of kraft paper, resin, and decorative paper that are fused together under high pressure and temperature to form a solid composite. This makes them resistant to impact, scratches, and vandalism.
Durability: Phenolic lockers are extremely durable and can withstand severe environments, heavy use, and abuse without significant damage. They are impact, water, and heat resistant.
Moisture and Corrosion Resistance: Highly resistant to moisture, phenolic lockers do not rust, corrode, or degrade in humid or wet conditions, making them suitable for places like pools, spas, and gyms.
Maintenance: They require minimal maintenance. Their non-porous surface is easy to clean and is resistant to graffiti and stickers, which can be removed without leaving marks.
Aesthetics: Available in a variety of colors and patterns, phenolic lockers can be designed to fit nearly any decor. They have a sleek, modern look that can be maintained over time due to their resistance to fading and discoloration.
Cost: The initial cost is higher compared to metal or wood lockers; however, their longevity and low maintenance may result in lower costs over time.
Environmental Impact: Phenolic lockers are often made with recycled materials and are themselves recyclable. They can also contribute to better indoor air quality since they do not off-gas like some wood products.
Best Suited Environments: Ideal for high-traffic areas, locations with high humidity, or where cleanliness and low maintenance are priorities.

Metal Lockers

Material Properties: Typically made from cold-rolled steel and coated with a powder finish or paint. They can vary in gauge (thickness), which affects their durability.
Durability: Metal lockers are strong but can be prone to dents and scratches. Heavier gauge steel can improve their resistance to damage.
Moisture and Corrosion Resistance: Without proper coating, metal lockers can rust and corrode over time, especially when exposed to moisture or chemicals.
Maintenance: May require periodic repainting and can show wear and tear more readily than phenolic lockers. Scratches may need touch-ups to prevent rust.
Aesthetics: Often have a utilitarian appearance, but can be painted in various colors. Over time, paint can chip and fade, which may require refinishing.
Cost: Generally less expensive than phenolic lockers, making them a cost-effective choice for many installations. However, potential maintenance and replacement costs should be considered.
Environmental Impact: Manufacturing and painting metal lockers can have more environmental impact, and there are concerns about eventual rust and disposal.
Best Suited Environments: Suitable for dry environments and where budget is a significant consideration, such as schools, offices, and industrial settings.

Wood Lockers

Material Properties: Made from natural wood or wood veneers, often with a protective laminate or sealant. The quality and durability can vary significantly depending on the type of wood and construction.
Durability: Wood lockers can be durable, but are generally more susceptible to scratches, dents, and moisture damage compared to metal or phenolic.
Moisture and Corrosion Resistance: Wood is naturally more vulnerable to moisture and requires sealants for protection. It can warp, swell, or rot in humid conditions if not properly treated.
Maintenance: Wood lockers may require more maintenance to preserve their appearance, including refinishing and repairing scratches or damage from impact.
Aesthetics: They offer a classic, elegant look that can provide a warm and high-end feel to locker rooms, especially in private clubs, spas, or executive settings.
Cost: Can vary widely based on the type of wood and construction quality. Solid wood lockers tend to be the most expensive, while laminate or veneer options are less so.
Environmental Impact: The sustainability of wood lockers depends on the source of the wood and the chemicals used in laminates and finishes.
Best Suited Environments: Best for lower-traffic areas where aesthetics are a priority and the environment is controlled to prevent moisture damage.

When deciding which type of locker to choose, one should weigh the specific needs of the facility against these factors. For example, in a high-end hotel or a country club, the aesthetic appeal of wood might outweigh the benefits of durability that phenolic offers. In contrast, in a public school or a municipal swimming pool, the durability and low maintenance of phenolic lockers might be the most critical factors.

Lockers

Why choose Metal Steel Aluminum lockers?

Post author By Jon Crain
Post date October 7, 2023

Metal lockers are a type of storage locker typically made of steel or aluminum. They are often used in schools, gyms, workplaces, and other public places to provide secure storage for personal belongings. Metal lockers are durable, easy to clean, and can withstand heavy use. They are also available in a variety of sizes and styles to meet different needs.

These lockers provide a private space for individuals to store personal belongings, such as clothes, bags, and valuable items. Below is an overview of metal lockers:

Types of Metal Lockers

Standard Lockers:
- Commonly found in schools and gyms.
- Usually feature a simple, functional design.
Box Lockers:
- Typically shorter and stackable.
- Often used in settings like break rooms where full-height storage isn’t necessary.
Vented Lockers:
- Ideal for environments where ventilation is crucial, like gyms or pools.
- Holes or slots allow air circulation inside the locker.
Employee Lockers:
- Used in workplace environments to provide storage for staff.
- Can vary in design to meet specific workplace needs.
Heavy-Duty Lockers:
- Designed to withstand rough usage and secure valuable items.
- Often used in industrial settings.

Materials and Construction

Material:
- Usually made from steel due to its durability and robustness.
Finish:
- Often coated with a powder finish to resist rust and corrosion.
Doors:
- Can have solid or vented doors based on the need for ventilation.

Features

Locking Mechanisms:
- Can have built-in locks or provision for padlocks.
- Some modern lockers may utilize digital locks or electronic access systems.
Shelving:
- Some lockers feature shelves or compartments for organized storage.
Hooks and Rails:
- Often have internal hooks or rails for hanging clothes and bags.

Considerations for Choosing Metal Lockers

Size:
- Choose a size that fits the available space and meets storage requirements.
Security:
- Consider the level of security required and select a suitable locking mechanism.
Durability:
- Opt for a sturdy build and high-quality materials to ensure longevity.
Ventilation:
- Ensure adequate ventilation if storing damp or odorous items.
Ease of Maintenance:
- Select lockers that are easy to clean and maintain.

Benefits

Durability: Metal lockers are made from strong and sturdy materials, such as steel or aluminum. This makes them resistant to damage from everyday use and abuse.

Security: Metal lockers can be locked to keep personal belongings safe and secure. This is especially important in public places where theft is a concern.

Versatility: Metal lockers are available in a variety of sizes and styles to meet different needs. They can be used to store a variety of items, such as backpacks, clothes, sports equipment, and work tools.

Easy to clean: Metal lockers are easy to clean and disinfect, making them ideal for use in high-traffic areas.

Metal lockers are used in a variety of settings, including:

Applications

Schools: Metal lockers are commonly used in schools to provide students with a place to store their belongings during the day.
Gyms: Metal lockers are also popular in gyms and fitness centers, where they can be used to store members’ clothes, shoes, and other belongings while they work out.
Workplaces: Metal lockers are also used in workplaces to provide employees with a place to store their belongings during the workday. This can include things like backpacks, lunchboxes, and personal items.
Other public places: Metal lockers are also used in other public places, such as swimming pools, libraries, and community centers.
Metal lockers are a versatile and durable storage solution that can be used in a variety of settings. They are a good choice for businesses, schools, and other organizations that need to provide secure storage for personal belongings.

Environmental and Safety Aspects

Recyclability:
- Metal lockers, especially those made from steel, are often recyclable.
Safety:
- Choose designs with rounded edges and safe locking mechanisms to reduce injury risk.
Compliance:
- Ensure lockers comply with applicable safety and accessibility standards.

Customization

Metal lockers can often be customized in terms of size, color, and internal configuration to cater to specific requirements. Some suppliers might offer customization services to provide personalized solutions for storage needs.

Lockers

Heavy duty lockers vs regular and discuss gauge steel differences

Post author By Jon Crain
Post date September 7, 2023

heavyduty sportslockers large gray 3w 1 1

Lockers come in various designs, sizes, and materials to accommodate different storage needs and settings. Among the types of lockers available, heavy-duty and regular lockers are two main categories. The gauge of steel often differentiates them, as well as their overall strength and durability.

The main difference between heavy-duty lockers and regular lockers is the thickness of the steel used to construct them. Heavy-duty lockers are made from thicker steel, which makes them stronger and more durable. Regular lockers are made from thinner steel, which makes them less expensive but also less durable.

1. Heavy Duty Lockers:

Material and Gauge: Typically constructed with thicker steel, which can be identified by a lower gauge number. A 12-gauge or 14-gauge steel might be used for heavy-duty lockers. The smaller the gauge number, the thicker the metal.
Durability: Built to withstand rough use, which is often seen in environments such as schools, gyms, or industrial settings. These lockers resist dents, scratches, and other forms of wear and tear better than their regular counterparts.
Security: Because of their robust construction, heavy-duty lockers tend to be more secure. The thicker steel makes them more resistant to tampering or break-ins.
Cost: They are more expensive than regular lockers due to the thicker material used and the added manufacturing processes needed for their construction.

2. Regular Lockers:

Material and Gauge: Regular lockers might be constructed from thinner steel, such as 16-gauge or 18-gauge. This makes them lighter and potentially less durable than the heavy-duty options.
Durability: Suitable for environments where they are not subject to constant or rough use. Regular lockers can be found in office settings or places with lighter traffic.
Security: They provide a basic level of security but might be more prone to tampering due to the thinner material.
Cost: Generally, regular lockers are more affordable than heavy-duty lockers.

Gauge Steel Differences:

Steel gauge refers to the thickness of the sheet metal. The lower the gauge number, the thicker the metal. Here’s a basic rundown:

12-gauge: 0.1046 inches thick
14-gauge: 0.0747 inches thick
16-gauge: 0.0598 inches thick
18-gauge: 0.0478 inches thick

In the context of lockers:

Thicker steel (lower gauge) means more durability, higher weight, and often, higher cost.
Thinner steel (higher gauge) is lighter and more economical but may not offer the same level of durability or resistance to damage.

Here are some of the factors to consider when choosing between heavy-duty lockers and regular lockers:

The intended use of the lockers. Heavy-duty lockers are best suited for environments where the lockers will be subjected to a lot of wear and tear, such as industrial and commercial settings. Regular lockers are a good option for residential and light-duty commercial settings.
The budget. Heavy-duty lockers are more expensive than regular lockers.
The desired level of security. Heavy-duty lockers are more secure than regular lockers.

If you need a durable and secure locker for a high-traffic or industrial setting, then a heavy-duty locker is the best option for you. If you are looking for a less expensive locker for a residential or light-duty commercial setting, then a regular locker is a good option.

Here are some additional things to keep in mind when choosing lockers:

The size of the lockers. Make sure the lockers are the right size to accommodate your needs.
The number of lockers. How many lockers do you need?
The features of the lockers. Do you need lockers with shelves, hooks, or other features?
The finish of the lockers. Do you want a painted or powder-coated finish?
The warranty. How long is the warranty on the lockers?

When choosing between heavy-duty and regular lockers, it’s crucial to consider the environment they will be placed in, the type of items to be stored, and the expected frequency of use. For high-traffic areas or places with potential rough handling, heavy-duty lockers are a more suitable choice. On the other hand, for lighter usage scenarios, regular lockers might suffice.

Uncategorized

Football Equipment Uniform Stadium Lockers

Post author By Jon Crain
Post date September 7, 2023

Football stadium lockers, particularly those found in professional and collegiate locker rooms, have unique characteristics to accommodate the needs of football players. These lockers are specifically designed for storing equipment, uniforms, and personal belongings, while also sometimes serving as a place for players to rest and mentally prepare for the game. Here are some of the main features and considerations associated with football stadium lockers:

Size: Football stadium lockers are generally larger than standard lockers. Football equipment, like helmets, shoulder pads, and cleats, takes up a lot of space. The lockers need to be spacious enough to accommodate all these items comfortably.
Ventilation: Proper ventilation is essential for these lockers. Football equipment can become sweaty and damp after practices or games, and proper airflow can help to prevent the growth of mold or bacteria and eliminate unpleasant odors.
Material: Many high-end football lockers are made of wood or a combination of wood and metal. This gives them a luxurious appearance while also being durable. Metal, particularly heavy-duty steel, is also common due to its durability and ease of maintenance.
Hooks & Rods: Inside the locker, there are usually multiple hooks for hanging jerseys, pants, and other equipment. Some lockers also include a horizontal rod for hangers.
Seats or Benches: Many football lockers come with a built-in bench or seat. Players can sit while changing, or use it to set down items temporarily.
Security: Lockers in a football stadium may come with combination locks, padlocks, or digital security systems to protect players’ valuables.
Customization: High-end locker rooms, especially in professional and major collegiate settings, might have customized lockers with individual players’ names, numbers, and even built-in tech like charging stations or personal screens.
Design & Branding: The aesthetic appeal of locker rooms has become more important, especially for top-tier teams. A well-designed locker room can be a point of pride for a team and can also play a role in recruiting for college teams. Team colors, logos, and other branding elements are often incorporated into the locker design.
Accessibility: It’s also important to consider accessibility standards to ensure that all players, including those with disabilities, can use the facilities.
Additional Storage: Some football lockers feature additional storage components such as drawers or cubbies. This can be useful for storing personal items or smaller equipment pieces.
The type of football stadium lockers used will vary depending on the size and budget of the stadium. Some stadiums may have individual lockers for each player, while others may have communal lockers that are shared by multiple players.The lockers are usually locked with combination locks to prevent unauthorized access. Players are given a combination to their locker when they arrive at the stadium.Here are some of the features of football stadium lockers:
- They are made of durable materials, such as metal or plastic, to withstand the wear and tear of everyday use.
- They are large enough to store a player’s helmet, pads, and uniform.
- They may have shelves or hooks for storing other belongings.
- They are usually locked with combination locks to prevent unauthorized access.

In summary, football stadium lockers are specifically tailored to meet the demands of football players and the equipment they use. When designing or choosing lockers for a football stadium, it’s essential to consider functionality, durability, aesthetics, and the overall player experience.

School Lockers

Why to replace school lockers instead of repair

Post author By Jon Crain
Post date September 1, 2023

The decision to replace lockers instead of repairing them can depend on various factors, including the extent of damage, the overall condition of the lockers, budget considerations, and the goals of the organization or individual making the decision. Here are some reasons why replacing lockers might be preferred over repairing them:

Extensive Damage: If the lockers have extensive damage, such as rust, broken doors, or structural issues, the cost and effort required to repair them might outweigh the benefits. In such cases, it could be more cost-effective and practical to replace them with new lockers.
Aesthetic Concerns: Lockers that are worn, damaged, or outdated in appearance can negatively impact the overall aesthetics of a space, such as a gym, school, or workplace. Replacing lockers with new ones can help improve the overall look and feel of the environment.
Functionality and Features: Lockers have evolved over time, and newer models often come with enhanced features such as improved security mechanisms, better ventilation, and more efficient storage solutions. If the existing lockers lack these features, upgrading to new ones can provide better functionality and convenience.
Cost Considerations: While repairs might seem like a more economical option upfront, the cumulative cost of repeated repairs can add up over time. In some cases, investing in new lockers can be more cost-effective in the long run, as they may come with warranties and require less maintenance.
Health and Safety: Damaged or deteriorating lockers can pose safety hazards. Sharp edges, loose parts, or structural instability can potentially cause injuries to users. Replacing lockers with new, safe units can help mitigate these risks.
Durability and Longevity: New lockers are likely to have a longer lifespan compared to repaired ones, especially if the original lockers are old or have been subject to repeated repairs in the past.
Customization: If the organization’s needs have changed over time, new lockers can be selected to match specific requirements such as size, layout, and storage options. This customization might not be feasible with repaired lockers.
Time and Disruption: Repairing lockers might involve downtime and disruption to the area where they are installed. Replacing lockers could potentially be a faster solution, reducing the impact on the facility’s operations.

It’s important to conduct a thorough assessment of the lockers and consider factors such as the cost of repairs, the availability of replacement parts, the overall condition of the lockers, and the specific needs of the organization. In some cases, minor repairs or maintenance might be sufficient to extend the life of the lockers. However, if the lockers are beyond repair or if the benefits of replacement outweigh the costs, opting for new lockers might be the more practical choice.

Lockers

Which Lockers Are Antibacterial, Mildew, or Mold Resistant? Exploring Your Best Options

Post author By Jon Crain
Post date August 17, 2023

school lockers for sale background image

Lockers have become an essential fixture in various settings, from schools and gyms to workplaces and recreational facilities. As we prioritize hygiene and cleanliness in our daily lives, it’s essential to consider the materials and features that contribute to a healthier environment. In this article, we will delve into the world of antibacterial, mildew-resistant, and mold-resistant lockers, uncovering their advantages and why they are a smart choice for your space.

Introduction:

Lockers have come a long way from being mere storage spaces. With advancements in materials and manufacturing techniques, lockers are now designed to provide more than just a secure compartment. In environments where cleanliness is paramount, such as schools, gyms, and workplaces, the demand for antibacterial, mildew-resistant, and mold-resistant lockers is on the rise.

Understanding Antibacterial, Mildew, and Mold Resistance:

Antibacterial, mildew, and mold resistance are essential features to consider when choosing lockers, especially in environments where moisture and humidity are prevalent. Lockers with these properties are designed to inhibit the growth and spread of harmful microorganisms, ensuring a cleaner and healthier storage solution.

Metal Lockers: The Resilient Choice

Metal lockers, often constructed from stainless steel, are renowned for their durability and strength. While they may not be inherently antibacterial, stainless steel’s non-porous surface makes it resistant to mold and mildew. Regular cleaning and maintenance can enhance their resistance over time.

Wood Lockers: A Natural Appeal with Extra Care

Wood lockers bring a touch of elegance to any space, but they require extra care to maintain their resistance against moisture and microbes. Proper sealing and finishing with antimicrobial coatings can help wood lockers fend off bacteria and mold, but regular upkeep is essential.

Plastic Lockers: The Modern Solution

Plastic lockers have gained popularity due to their lightweight nature and resistance to moisture-related issues. Many plastic lockers are designed with antimicrobial agents that prevent bacterial growth, making them a suitable choice for environments where cleanliness is a top priority.

Phenolic Lockers: Where Durability Meets Hygiene

Phenolic lockers are engineered to withstand tough conditions while offering excellent resistance to bacteria, mildew, and mold. The compact laminate material and solid construction make phenolic lockers an ideal choice for facilities that demand both durability and hygiene.

Comparing Lockers for Resistance:

When comparing locker materials, it’s important to consider factors such as material composition, maintenance requirements, and intended usage. While each material offers its unique benefits, phenolic lockers tend to stand out for their exceptional balance of strength and resistance.

Benefits of Using These Specialized Lockers:

Healthier Environment: Antibacterial, mildew-resistant, and mold-resistant lockers contribute to a cleaner and safer space, reducing the risk of infections.
Extended Durability: The materials used in these lockers are often more resilient to the elements, ensuring a longer lifespan.
Low Maintenance: With reduced bacterial, mildew, and mold growth, maintenance efforts are minimized, saving time and resources.
Aesthetically Pleasing: These lockers maintain their appearance over time, enhancing the overall aesthetics of your space.
Peace of Mind: Users can confidently store their belongings knowing that the lockers prioritize hygiene and protection.

Factors to Consider When Choosing Lockers:

When selecting lockers for your facility, there are several factors to keep in mind:

Environment: Assess the level of moisture and humidity in the area where the lockers will be placed.
Usage: Consider the intended use of the lockers – whether it’s for personal belongings, uniforms, or equipment.
Material: Opt for lockers crafted from high-quality, durable materials that align with your needs.

Maintenance: Evaluate the ease of cleaning and maintaining the lockers in the long run.

Maintenance and Care Tips:

To ensure the longevity of your specialized lockers:

Regular Cleaning: Wipe down the lockers with a mild disinfectant to prevent the buildup of bacteria.

Proper Ventilation: Maintain adequate ventilation in the storage area to minimize moisture-related issues.

Timely Repairs: Address any damages or wear and tear promptly to prevent further deterioration.

Enhancing Hygiene in Educational Institutions:

Schools and colleges can greatly benefit from the integration of antibacterial lockers. These lockers can help reduce the spread of illnesses among students and create a healthier learning environment.

Revolutionizing Locker Rooms in Sports Facilities:

In gyms and sports facilities, the demand for lockers that combat bacteria and moisture is evident. Specialized lockers contribute to the overall hygiene of these spaces.

Safe and Clean Storage Solutions for Workplaces:

Workplace lockers play a crucial role in storing personal items and work-related gear. By investing in antibacterial, mildew-resistant, or mold-resistant lockers, employers prioritize the well-being of their employees.

Choosing the Right Lockers for Your Needs:

To make an informed decision:

Research: Explore the different types of specialized lockers available in the market.
Reviews: Read reviews and testimonials to gauge the effectiveness and durability of the lockers.
Consultation: Seek advice from experts to identify the best locker options for your specific requirements.

A Step Towards a Healthier Future:

The integration of antibacterial, mildew-resistant, and mold-resistant lockers marks a positive stride towards healthier and more hygienic spaces. As we prioritize cleanliness, these lockers provide an effective solution to combat bacteria and prevent the growth of mold and mildew.

Frequently Asked Questions:

Q: Are these specialized lockers more expensive than traditional lockers?

A: While there may be a slightly higher upfront cost, the long-term benefits and reduced maintenance costs often outweigh the initial investment.

Q: Can I retrofit my existing lockers with antibacterial properties?

A: It’s best to consult with locker manufacturers to explore retrofitting options, as it depends on the design and materials of your current lockers.

Q: How often should I clean antibacterial lockers?

A: Regular cleaning with a mild disinfectant is recommended, especially in high-traffic areas.

Q: Are mold-resistant lockers suitable for outdoor use?

A: Mold-resistant lockers can withstand outdoor conditions to a certain extent, but it’s advisable to place them in sheltered areas.

Q: Can I customize the appearance of these lockers?

A: Yes, many manufacturers offer customization options, allowing you to choose colors and finishes that complement your space’s aesthetics.

Conclusion:

In conclusion, the quest for antibacterial, mildew, or mold-resistant lockers leads us to a range of materials, each with its own strengths and considerations. Metal, wood, plastic, and phenolic lockers offer various levels of resistance, catering to different needs and environments. By understanding the qualities of these materials and assessing your requirements, you can make a well-informed decision for lockers that combine functionality, durability, and hygiene.

Lockers

Exploring Various Locker Sizes, Dimensions, Configurations, And How To Measure

Post author By Jon Crain
Post date July 17, 2023

phenolic lockers outdoor recreation lockers

Are you on the hunt for some sweet new lockers for your school, office, gym, locker room, or other fun space? Well, you’ve come to the right place, locker pals! I’m here to help walk you through all the locker lingo so you can pick out the most radical lockers that will be a perfect fit. There are lots of different locker sizes, shapes, layouts, and more to figure out – but don’t sweat it. We’ll take it step by step. Strap on your thinking caps, and let’s get locking!

Locker Dimensions

First things first, we gotta talk locker dimensions. That’s a fancy way of saying the height, width, and depth – how big the actual locker is inside. Having the right size locker space is crucial for stashing all your stuff neatly. Most normal lockers are about 72 inches high. But if you’ve got some tall students or grownup employees over 6 feet, you’ll wanna get lockers that are more like 78 or even 84 inches high. That way, the jolly giants don’t have to hunch over and can actually stand up straight in their locker space! For width, lockers often come in 12, 15, or 18 inches wide. Wider sizes like 15-18 inches are better for being able to cram in bigger stuff like puffy winter jackets, sports gear, and bulky backpacks. Then there’s locker depth – that’s how deep front to back they are inside. Locker depths usually range from 12 inches to 24 inches deep. The more depth you’ve got, the more room there is to stash loads of items from floor to ceiling! So go as deep as you can fit for maximum interior space.

How To Configure Your Locker Layout

Now let’s chat about how to configure your locker layout. The most popular options are single-tier or double-tier lockers. Single-tier means you’ve got one single locker stacked on the floor. Double-tier means there are two lockers stacked up – one locker on the top and one on the bottom. Double-tier setups are cool because you can fit more peeps in the same amount of space! Some other funky locker options are Z-shaped lockers that have a cool angled design, waterfall lockers that open on a slanted angle, and bring your own lock (BYOL) lockers that have built-in locks, so you don’t need a padlock. So get creative with different locker shapes and setups!

When planning out your locker layout, make sure to leave enough room between the lockers and around corners so the doors can fully swing open without bonking into each other. You’ll want to have at least a 6-inch gap between locker sides and a couple of feet of space at the ends of each row so peeps can easily squeeze through. Get the spacing right in your layout, and you’re golden!

Locker Dijmensions For Different Spaces

Now let’s get specific about what locker dimensions work best for different spaces:

School Lockers

For schools, the average locker size is usually around 12 inches wide x 12 inches deep x 72 inches high. This gives you a roomy single-person locker. But for high schools, go bigger with 15-18 inch widths and taller 78-inch heights to give those teeners with lots of stuff extra room. Gotta make sure to leave space up top for books and shelving and room down low for kicking off shoes and boots! Most schools do best with standard single-tier or double-tier locker configurations and make sure to leave enough aisle space in the hallways for busy passing periods between classes when peeps are hustling to swap out books.

Office Lockers

For offices, a common locker size is 12 inches wide x 18-24 inches deep x 78 inches high. The deeper depth lets grownups store bigger items like purses, lunch bags, gym clothes, and spare shoes. Also, make sure to include a top shelf in office lockers for hats, helmets, and other misc items. See if you’ve got room for wider 15-inch wide models to give extra elbow space. Single-tier or double-tier lockers work for offices depending on how much room you’ve got. Just make sure the layout allows the locker doors to fully open without bumping into walls or each other.

Gym Lockers

When it comes to the gym or athletic lockers, bigger is better! You’ll want locker dimensions of at least 15-18 inches wide x 24 inches deep x 78-84 inches high. This gives athletes plenty of interior space to neatly stash all their sports gear and equipment. Getting lockers with vented doors or slats for air circulation is also a good idea, so stinky sweaty clothes and gear can dry out nicely. If you’ve got room, having a bench placed between facing rows of gym lockers gives peeps a place to sit while changing. And double-tier lockers configurations are great for maximizing every inch of space usage in the room.

Locker Room Lockers

In locker room spaces, go for full-sized lockers that are nice and big, usually around 18 inches wide x 24 inches deep x 84 inches high. This gives ample room for hanging jackets, storing shoes, and neatly piling in all your gear. Getting lockers with vented or mesh doors is important to help keep moist locker room air dry and aired out. Make sure to include adjustable interior shelving and coat rods too. Having a smaller set of upper lockers stacked over the main big ones is handy for stashing shoes, wallets, watches, and other small valuables. And be sure to space the whole layout with easy entrance and exit flow so people aren’t bumping into each other coming and going.

How To Measure Space:

Alright, got your ideal locker dimensions picked out? Nifty! Now let’s make darn sure you measure the space properly where the lockers will live:

First, measure the total length and width of the floor area in the room. Next, sketch out the room layout on paper or a computer. Make sure to mark where any columns, doors, windows, protrusions, or other permanent fixtures are located. Now you can start figuring out your dream locker size and configuration. Play around sketching different locker layouts on grid paper to scale. Always be sure to include enough spacing between the sides of the lockers and adequate space at the ends of each row.

Once you settle on the perfect locker layout, double-check that the total calculated length and width of your planned locker setup add up to the real measurements of the actual space. They need to align properly, or it won’t fit! If the dimensions don’t match up at first, keep adjusting your sketch until the measurements work. If possible, visit the space during busy high-traffic times to observe how people naturally move around and through the area. Ensure your planned locker layout allows easy, congestion-free foot traffic flow. Tweak the layout as needed to optimize space usage.

Final Thoughts

With all the right locker size specs, smart layout planning, and proper space measurements – you’ll be ready to pick out the perfect lockers and start unlocking the possibilities! Enjoy creating efficient, organized storage that suits your space just right. Let me know if you need any more locker decoding tips!

Lockers

Types Of Lockers And Their Features

Post author By Jon Crain
Post date June 11, 2023

Lockers are commonly seen almost everywhere in our daily routine such as schools, gyms, workplaces, and even public areas like train stations and airports. These storage units give us a feeling of safety and confidentiality for our personal belongings, enabling us to move around without the weight of carrying all our stuff. The market offers a wide range of lockers, including metal and laminate options, each with unique features. Choosing the right locker can be a daunting task due to the abundance of choices available. While some prioritize strength and longevity, others prioritize customization and aesthetics.

Metal lockers

A popular choice for safe and lasting storage in institutions such as schools, gyms, and workplaces are metal lockers. They boast sturdy construction and multiple compartments for organized storage. They boast sturdy construction and multiple compartments for organized storage. Metal lockers provide rust resistance, ensuring they maintain their quality over time. Furthermore, they are highly durable, withstanding heavy use and harsh environments. Ventilation options ensure proper air circulation in the locker space, preventing unpleasant odors from forming inside them. Lock options vary from combination locks to key locks that can be easily replaced if lost or damaged. Moreover, customization choices allow you to tailor the locker to your specific needs by selecting the color or size of your choice.

Phenolic plastic lockers

While some may prefer the durability and classic look of metal lockers, others might be drawn to the sleek and moisture-resistant qualities of phenolic plastic lockers. These types of lockers are made from high-pressure laminate (HPL), which is a composite material that consists of multiple layers of paper or fabric impregnated with resin and bonded together under high heat and pressure. Phenolic plastic lockers are highly durable and resistant to scratches, dents, corrosion, and graffiti. They can withstand harsh environments such as swimming pools, gyms, schools, hospitals, or industrial settings. Moreover, they come in a variety of customization options such as sizes, shapes, configurations, or door styles. Maintenance requirements for phenolic plastic lockers are minimal since they do not require painting or repainting like metal lockers do. The eco-friendliness aspect also contributes to their popularity among those who want to reduce their carbon footprint.

Wood lockers

Wood lockers offer a natural and warm aesthetic appeal that can enhance the overall ambiance of a space, making them an ideal choice for settings such as spas, country clubs, or luxury hotels. These lockers are highly customizable and can be designed to fit any specific need or style preference. Wooden locker maintenance is relatively easy and requires only occasional cleaning with mild soap and water. Wood locker durability depends on the type of wood used, but generally speaking, they are sturdy enough to withstand daily use without showing signs of wear and tear. Eco-friendly wood lockers are also available for those who prioritize sustainability in their purchasing decisions. Design trends for wood lockers include incorporating unique textures or finishes to create a one-of-a-kind look that stands out from traditional metal or plastic options.

Laminate lockers

Surpassing the traditional locker options in durability and versatility, laminate lockers offer an unmatched level of customization that can elevate any space with its sleek, modern design. These lockers are highly durable and offer a wide range of color options for customers to choose from. Laminate locker customization is also a great feature as customers can tailor the lockers to fit their specific needs. For instance, ventilation options can be added to ensure proper air circulation within the locker. In addition, security features such as locks and reinforced doors provide peace of mind for users who want to keep their belongings safe. The laminate material used in these lockers is resistant to scratches and dents, making them perfect for high-traffic areas like schools and gyms where they will receive constant use.

HDPE plastic lockers

HDPE plastic lockers are a durable and versatile storage solution that offers exceptional resistance to moisture, impact, and corrosion. When compared to laminate lockers, HDPE plastic lockers have superior durability and require less maintenance over time. Additionally, they offer a wide range of customization options including size, color, and locking mechanisms. The installation process is also relatively simple and can be completed quickly with minimal disruption to the surrounding area. With an array of color options available, facilities can choose from a variety of aesthetically pleasing locker designs that match their branding or decor.

Conclusion

Lockers have become an integral part of our lives, whether it is at school, work, or the gym. They provide a safe and secure place to store our belongings while we focus on other tasks. The market today offers various types of lockers that cater to different needs and preferences. Metal lockers are robust and durable, while phenolic plastic lockers are resistant to moisture and bacteria. The Big Locker Warehouse is known for providing quality services when it comes to purchasing or renting lockers. However, despite the availability of these storage solutions, it’s ironic how people still tend to lose things even when they have a designated space for them. Perhaps we need to reflect on why this happens and how we can improve our organizational skills. In conclusion, the importance of having access to reliable storage solutions cannot be overstated; however, it’s also essential that we develop good habits when it comes to keeping track of our belongings

Uncategorized

Choosing The Correct Locker for Your Application

Post author By Jon Crain
Post date February 11, 2023

Choosing The Correct Locker for Your Application

The first question everyone ask, once they decide they need to purchase lockers for their business or organization is, what is the best type of locker will best fit our needs?

Locker Materials Types and Their Applications.

Metal-Wood-Plastic-Phenolic

Metal Lockers – Metal lockers are the most popular and come in many sizes and gauge thickness.The lower the gauge number the thicker the steel.(16 ga. is stronger than 24 ga.)

Standard Metal Lockers – This is how the industry identifies 80% of metal lockers used in schools (K thru 12) and most office and employee applications. The doors and frames are constructed of 16 gauge steel, the backs are 18 gauge steel and the tops, bottoms, sides and shelves are of 24 gauge material. All lockers come with standard louvers punched in the doors. The most popular lockers come in single tier, two tier, three tier, four tier five tier, and six tier. (a tier is the how the doors are arranged inside one frame, this applies to all types of lockers). Standard door width size (left to right) 12”, 15” 18” and 24”. Standard depths (front to back of the locker) are 12”, 15” 18” 21” and 24”. Standard heights 60” and 72” with 6” legs. Most lockers are finished are with a baked on powder coat finish.
Heavy Duty Lockers/ Heavy Duty Ventilated – This stye locker is ideal for school gyms, team rooms (baseball, basketball, field hockey, football) and any other application where there is potential where heavy abuse may occur. Heavy duty lockers come in same configuration as Standard Metal Lockers bur they are made of heavier gauge steel. The doors are 14 gauge steel, body parts 16 gauge, and the backs are 18 gauge. The doors and sides have diamond perforated ventilation to allow a greater air flow into the lockers The standard sizes are the same as the standard lockers. Team room lockers offer larger sizes and features. Check with biglockerwarehouse.com for selections.

Wood Lockers – Ideal for Golf/ Country Clubs, Health Clubs, Spas, Fitness Centers and Team Rooms.

Wood lockers are offered in various types of wood materials depending on the manufacturer. Body construction is ¾” plain sliced red oak plywood throughout including the sides, backs and shelves. Body style for most wood applications come in single tier double tier, three tier and four tier. Doors are of furniture grade red oak plywood and finished with three coats of lacquer. Hinges are concealed European style, other standard features are coat hooks and coat rods.
Wood Sport Locker are open front (no doors) for use in all team room applications. The lockers are made of high quality furniture grade materials. Most manufacturers offer a security box with lock options, lower footlocker that doubles as a seat, coat rods and hooks. The body and frame are made of furniture grade red oak and come in various finishes.

Solid Plastic- Solid Plastic Lockers are ideal for Swimming Pools, Bath Houses, Hospitals and Industry.

Plastic lockers and made of solid plastic high density polyethylene panels for maximum strength. The advantages of selecting plastic lockers are resistant to scratches, rust, corrosion, impact, mildew chemicals and graffiti.
Plastic locker features consist of corrosion proof high density polyethylene with 3/8” thick body panels. Body styles are similar to that od metal and wooden lockers as they are offered in single tier, double tier, three tier, six tier and a “Z” style double tier. Hinges are made of heavy duty continuous extruded aluminum with a powder coat finish. Sizes are offered in many of the same sizes as metal lockers. Many of the plastic locker manufacturers will provide lockers to fit your requirements.

Phenolic Lockers – Ideal for where durability, strength, and high end appearances are required. Great for health clubs, country clubs, and executive washrooms.

The non-porous surface of phenolic material eliminates the ability for mold, bacteria and mildew to grow. Phenolic components will stand up to extreme conditions of humidity and moisture. They are also graffiti resistant and easy to clean.
Doors are ½” thick with tops, bottoms and sides 5/16” thick. Frameless design maximizes clear opening. Phenolic lockers are offered in a verity of sizes and configurations similar to wood lockers. Phenolic lockers offer the longest warranty of any other locker on the market. Most manufacturers will from ten to twenty year warranty on their lockers.

Uncategorized

National Locker Supplier Offers Wholesale Discounted Lockers to Schools and Businesses

Post author By Jon Crain
Post date January 17, 2023

National Locker Supplier Offers Wholesale Discounted Lockers to Schools and Businesses

Big Locker Warehouse is a trusted industry leader in providing wholesale discounted lockers to schools and businesses across the United States. Known for their dedicated customer service and a broad selection of lockers, shelving, storage products and locker accessories. They provide various types of lockers including metal, wood, plastic and phenolic lockers, for a variety of applications. Big Locker Warehouse specializes in providing premium lockers for schools and businesses. All products are fully guaranteed against manufacturing defects or damage during shipping. Plus, they provide bulk discounts on large orders placed by customers which saves them even more money.

Big Locker Warehouse is just one of many e-commerce marketplaces operated by the company. A representative of the company said, “Our goal is to provide you with an e-commerce marketplace that is intuitive and easy to navigate; stocked full of the best brands on the market; and full of content enabling you to make educated purchases of the supplies you need”. We’ve been able to provide our products and discount locker solutions to clients such as the U.S. Department of Homeland Security, Geneva College, Costco & the Pittsburgh Steelers.

Many schools, whether a middle school, high school or college, face the challenge of finding a quality locker supplier for their school. No matter the class size or variety, school lockers are a must in order to upgrade and keep students belongings safe.. Between the mix of classes, clubs, sports, and productions, there are a lot of books, uniforms, bags, homework, jackets, and everything in between. A locker is a home base for not only schoolwork, but a social spot for friends, the one place where students know that they and their belongings are secure. From hallway lockers to locker rooms, from preschool through college, Big Locker Warehouse offers every kind of locker for school that you could possibly need. To learn more about available school lockers visit: https://biglockerwarehouse.com/school-lockers

Most companies need employee lockers. Think about it. You’ve helped to build your company from the ground up. You take pride in what you do each day. You provide quality products and services, and in doing so, your company has grown. As you’ve helped create more jobs and hire more staff, security becomes an increasing concern. Occasionally things might go missing: a stapler, a lunch, inexpensive supplies, nothing big yet. That’s why your office will need the safety and security of employee lockers for your business. Big Locker Warehouse offers a variety of office lockers for your employees. To learn more about available employee lockers visit: https://biglockerwarehouse.com/employee-office-lockers/

As a top selling discount locker supplier in Pittsburgh, the company selects only the best made lockers in the industry. Big Locker Warehouse is well known in the industry for their prices, customer service and product knowledge. They are BIG on quality, BIG on selection, and BIG on savings. The next time you are in need of affordable premium lockers for your school or business, choose Big Locker Warehouse.

Contact Info:

Name: Doug Houston

Email: [email protected]
Organization: Big Locker Warehouse
Address: 9504 Sundance Drive, Bridgeville, PA 15017
Phone: (877) 452-6900

Website: https://biglockerwarehouse.com

Uncategorized

Tips for Choosing Lockers for Your Health Club or Gym

Post author By Doug Houston
Post date October 10, 2022

It doesn’t matter if you’re building a new health club or refurbishing your tired sports club: your lockers form an essential expenditure.

Combining the challenges of choosing the right material, best design, and space versus number of users takes a lot of work. This quick guide will make sure you’re asking yourself the right questions before you invest in new lockers for your gym.

Vital Questions to Ask Before You Buy Lockers for Your Gym

Your customers want space, security, and easily accessible lockers. Make sure you give this to them by considering these essential questions on your locker purchase quest.

How Much Space Do You Need for Lockers?

You need to seriously consider how much space you have for lockers and weigh this up against the number of people likely to need a locker at any one time.

Choose your busiest time to assess the typical maximum number of lockers required. This will ensure you’ll keep customers happy – there’s nothing worse than running out of lockable storage in peak hours!

Look at the vertical space as well as floor square footage you have available. Stacking two large or three smaller lockers helps to keep the footprint to a minimum without disappointing customers. However, you’ll also need to think about how easy it is to access stacks: will strangers have to interrupt each other to access their stuff?

What Will Your Lockers Need to Store?

Your facility type will dictate the minimum size you need for each cabinet. A health club, for example, with predominantly swim and spa facilities, can accommodate smaller lockers. Most customers will store a change of clothes and that’s about it.

A sports facility, however, needs larger lockers. They’ll need to accommodate equipment such as tennis rackets as well as additional items such as extra changes of clothes and towels.

How Will Your Lockers Operate?

Will your customers need to bring their own padlock? Do you want a coin-operated system? What about an automatic or digital locking system?

You’ll need to consider how you’ll balance security with convenience. Coin-operated doors, for example, are useful for sports clubs with both member and pay-as-you-play customers. A high-tech system, on the other hand, would suit high-end membership-only clubs to add to the security and give a feeling of luxury, too.

You’ll also need to think about how you’ll access lockers with forgotten keys or that have been locked and left for days on end.

How Will You Balance Security With Hygiene?

Your customers need to know their items are safe – but you also don’t want sweaty gym kit festering and causing a health hazard.

Good air flow is essential for storage in sports-based facilities, but you want your customers to feel their stuff is protected. Mesh lockers are very practical but they can leave the contents visible when locked: while they’re secure, customers may wish to have more privacy for their items.

Is Aesthetic or Price More Important to You?

A smart locker room improves the overall customer experience of any facility. However, the material you choose for yours will affect the price.

Metal and plastic lockers are cost-efficient, easy to clean, and hard-wearing. However, in luxury health club settings they can look out of place. In this case, quality wood cabinets are a better choice – but they’ll be more costly to put in place.

Speak to an Expert to Find Your Perfect Gym Storage Solution

When you’ve whittled down your options of space, number and configuration of cabinets, and overall style, it’s time to shop around.

There are so many options for lockers out there, however, it’s often an overwhelming experience to try and purchase them alone. Speak to our expert team today to find out more about our specialized options available for sports and health facilities like yours.

Employee Lockers

Top 10 Benefits Of Employee Lockers In The Workplace

Post author By Doug Houston
Post date August 15, 2022

The use of locks is beneficial in many situations. It would help if you considered installing employee lockers at work for a variety of reasons, whether you are in a school, office, or warehouse. Today, almost every student and employee rely on several different devices to get them through the day, including tablets, laptops, work phones, headsets, and other devices.

It can be inconvenient and also tiring to carry around all these items and equipment. Employees will appreciate the convenience of having storage employee lockers while working and moving around the office. Throughout this article, we examine why you should consider installing employee storage lockers at your workplace and what you will gain from workplace lockers.

1. Employee lockers provide an organized workspace

If employees do not have a place to store their belongings, your workplace could become cluttered. The installation of storage work lockers for employees can help keep surfaces clean and clutter-free in your workspace.

By storing work equipment in office lockers for employees, employees can reserve desk space for other purposes, such as storing hats, bags, tools, and other clothing until they need them. If your office is cluttered and untidy, then you’ll become less productive. So, make sure your office is neat, clean, and spacious.

2. Employees should have control over items

Storage areas allow employees to manage their personal belongings as well as feel like part of the company. A personal locker would enable employees to feel like part of the business as they have their own small storage office space for tools and equipment. Your brand identity can also be reflected by the lockers’ colors and materials, allowing them to reflect your identity. Employees can also customize them.

3. Coworkers share storage

A locker can serve as both a place to store personal items and a shared storage facility for your company. You can use lockers in the workplace for various purposes, including storing stationery so that employees do not take bulk orders.

4. Employee lockers eliminates clutter in the workspace

There will be no staff lockers, so employees will have to keep their own items at their desks, including coats and bags. Employees will be more productive in an organized workspace. In an organized office, you could store documents and equipment in the work area. Your office environment will significantly improve when you install staff lockers.

5. Employee storage lockers boosts the efficiency of organizations

You store all your personal belongings and work equipment in staff lockers. It is, therefore, easier to avail of stationery, laptops, and documents whenever needed, rather than worrying about them getting lost. This will increase productivity and efficiency.

6. Employee lockers enhance productivity

Clean environments lead to higher productivity among workers. If you are considering getting lockers for your office, you are making a wise investment since they not only keep your workspace more organized, depending on the lockers you choose. Additionally, they can improve the appearance of the office in general. Personnel should find it easier to accomplish their goals when there is less mess to contend with.

7. Foster good discipline and practice

Your staff may also be more mindful of what they bring to work if they have a place to put their personal items and are surrounded by desk dividers. It’s not unusual for people to bring various items to the office that aren’t really necessary. Lockers are a small solution that promotes good office practice. Providing guidelines for what items your staff can leave or store in 3 drawer filing cabinets is also a good idea.

8. Personalization

A business can benefit from utilizing lockers within a workplace environment to showcase its brand identity. A locker door made from various materials and colors can help the company state its brand and culture.

The employees must be reminded of the company’s aims by following this approach, yield astounding results. The locker customization option allows employees to personalize their lockers with identifying pictures to know how much the company values them.

9. Sense of Belonging

Since it gives employees a sense of control over their space, providing a place to store personal items has increasingly become important. Employees who can control how their goods are handled gain peace of mind and become more focused on improving the business with file cabinet accessories.

While creating an environment where every employee feels connected is challenging, ensuring they have a piece of mind helps keep them engaged as they feel a part of the company.

10. Security, theft protection, fire protection, etc.

An office must be secure at all times. The employees will not feel safe using their personal devices such as smartphones and avoiding conflict caused by lost items. Having a private space where they can store their belongings will make them feel more at ease during their working hours. The lockers come with keys, so employees won’t need to worry about anyone else gaining access to their valuables.

When valuables are out in the open, they are more vulnerable to theft, creating a distrustful and insecure environment. Such a situation would cause the employees one by one to leave their jobs, and the business would suffer. Various filing cabinet lockers can even protect valuables from natural calamities like fire, etc.

School Lockers

5 Things You Should Know Before Replacing Your School’s Lockers

Post author By Doug Houston
Post date June 13, 2022

When the piles of old chewing gum have hardened into stalactites, when students are selling limited shelf space on the black market, when you just can’t figure out where that smell is coming from, it’s time to replace your school lockers. Or, for that matter, when you’re looking to upgrade your locker locks or bring some added color into your hallways – there are plenty of good reasons for a school locker refresh.

But school locker replacement offers a short window for school administrators – the time between “School’s out!” and “Is summer over already?” is generally about three months, which is less time than it feels like for maintenance, particularly when programs like summer school have students still roaming the halls well into July. That means any school preparing to repair, upgrade, or otherwise replace its lockers needs to start the process now if the kids are going to have somewhere to stow their gear when they come back to school.

Before we begin: Do school lockers really matter?

Maybe you don’t have any lockers to replace or aren’t even in the market for high school lockers yet. Maybe you’re still deciding whether lockers are something you need to offer at all.

While it’s true that every school is different, the answer for most schools is a resounding yes. The benefits of school lockers are considerable – they give students a secure, private place to store valuables like cell phones (keeping them out of student hands during class) and personal items. Every bulky backpack stored in a locker is one that isn’t clogging hallways during class changes. And most importantly, school lockers help lighten kids’ loads, giving them a place to store heavy books and bags and avoid some of the many back, shoulder, and neck problems associated with towing around too much stuff at an age when their bodies are still developing.

So yes, school lockers are an important addition to most school facilities. But just as important is having the right lockers for your needs. Here are seven things to keep in mind as you’re adding, repairing, or replacing your school’s lockers.

1. LOCKERS AREN’T JUST LOCKERS.

One of the most familiar fixture in any school hallway is the standard steel locker – a metal box with a locking door in front, available in various heights, arranged in one, two, or three tiers. Features inside might include a coat hook, coat rod, and/or shelf, space allowing. Many school lockers are available in a range of colors for that extra dose of school spirit. And one of those choices will generally be sufficient to serve the purposes of most middle-schoolers and high-schoolers.

Those aren’t the only lockers a school might need, though. In an athletic locker room, standard steel lockers leave little ventilation for sweaty gym clothes and wet towels, leading to that classic eau de gym sock aroma. For those purposes, a special gear locker or ventilated locker – available in a variety of sizes, with a variety of added features – can provide for all of the security with none of the stink.

2. LOCKER SIZE IS A BIGGER DEAL THAN YOU THINK.

School lockers generally range in size from around 7.5 cubic feet (for a three-tiered model) to 9 cubic feet (for an extra-tall, extra-deep one-tiered model), and the right size for your school depends on the needs of your student body. If your students tend to carry lots of books, have large bookbags, or have to wrangle bulky outerwear during cold weather, the full-length version can offer more real estate to store their belongings. (And remember that kids at this age are still mastering the art of good judgement – “I can’t fit my puffer coat into my locker” can easily turn into “so I just won’t wear one, despite the snow, since I am invincible.”) If students have less gear to manage, half-height, two-tiered lockers could get the job done with a smaller footprint.

3. ALL LOCKERS ARE NOT CONSTRUCTED ALIKE.

For locker purposes, metal strength is measured in gauge – the higher the gauge number, the thicker and stronger the metal will be. And strength matters when you’re dealing with students who will be loading heavy stacks of books and gear into their lockers (and probably kicking soccer balls down the hall and denting those shiny metal doors). You’ll generally find school lockers ranging from 12 gauge to 18 gauge – 16-gauge steel will get the job done for most common usage, but you can make your choice depending on needs and budget.

4. ALL LOCKS AREN’T ALIKE, EITHER.

Lockers can be purchased with or without built-in combination locks (or even, budget permitting, digital keypads). Lockers that come without built-in locks and require a separate padlock tend to be less expensive, and they leave students the freedom to choose their preferred type of keyed or combination lock, if the school chooses not to provide its own. Padlocks tend to be less secure than built-in locks, both in the sense that they’re easier to defeat with a pair of bolt cutters and that there’s nothing less secure than a student who decides not to bother with a lock at all. (Again: Still working on judgment.) But don’t feel that a padlock is totally insecure – opting for a high-quality, well-constructed padlock goes a long way toward improved locker security.

5. CLOSING MECHANISMS MATTER.

If you do choose school lockers without built-in locks, you’ll have options for your closing mechanism, including a latch hasp, a lift lock, or a recessed latch, all of which can be secured with a padlock. A latch hasp, while frequently one of the budget-friendlier options, has some disadvantages – those lockers often lack any other kind of latching mechanism, making them less secure, and the protruding hasp runs the risk of catching on clothes and body parts. The recessed latch, while sometimes more costly, also tends to be the most secure and the least likely to snag.

6. IT’S ABOUT MORE THAN JUST THE BOXES.

Look for add-ons that can add extra utility and convenience to your school lockers. If they won’t be installed into a purpose-built nook, a sloped top addition to the bank of lockers can make sure the answer to, “Where is that smell coming from?” isn’t “a peanut butter sandwich that’s been on top of the lockers since October.” Base plates can keep items like pencils and keys from getting kicked underneath the lockers and lost. And don’t forget the small but crucial details like number plates for the doors.

7. LOGISTICS COULD BE A MAJOR ISSUE IN 2022.

One of the biggest challenges school administrators are facing as they prepare for Back-to-School 2022 is ongoing supply chain issues, from shipping delays to shortages in essential materials like steel. Actual availability of your preferred lockers should be taken into account. Unexpected production and shipping delays are, of course, unexpected, and if you’re on a tight timeline, you’ll want to make sure your lockers of choice are already in stock before placing your order. And if you’re particularly pressed for time, see if your school lockers can be delivered pre-assembled. It’s not cheating, we promise.

Summer is coming fast, and while you and your students are both counting down the days (for totally different reasons, we’re sure), don’t forget to get your plans for summer maintenance together. Now that you know what to look for, you’re ready to make your school locker shopping list so when the kids come back in the fall, they’ll have a strong, secure, roomy place to store their discarded gum and, ideally, also school supplies.

The information contained in this article is for informational, educational, and promotional purposes only and is based on information available as of the initial date of publication. It is the reader’s responsibility to ensure compliance with all applicable laws, rules, codes and regulations. If there is any question or doubt in regard to any element contained in this article, please consult a licensed professional. Under no circumstances will Global Industrial® be liable for any loss or damage caused by your reliance on this article.